Automatic lubrication pump is a kind of lubrication equipment, supplying lubricant to the lubrication part, equipped with an induction motor, which can be applied in the centralized lubrication system of engineering, forging automation and other mechanical equipment. Automatic lubrication means safer operation and is the best time for machinery such as vehicles to lubricate when they are moving. The use of manual grease or lubricating oil to mobile equipment such as vehicles is a high-risk, unsafe situation for operators. In general, automatic lube oil pumps are safer and more efficient than manual lubrication pumps.
With automatic grease pumps for on-board or heavy equipment, unplanned downtime will be reduced and your maintenance costs will be reduced. In addition, automatic lubrication systems provide stable lubrication more frequently than manual lubrication systems. It’s important to remember that too little lubrication can generate heat and wear, while too much can generate resistance, heat and wear, and may even damage seals.
Automatic lubrication pumps keep machinery and equipment such as vehicles optimally lubricated in the harshest working environments. Maximize lubrication characteristics by keeping your vehicles and equipment running, rather than being lubricated when stopped. When the automatic lubrication pump is running, its filter removes contaminants from the air and prevents debris from entering the lubrication point.
When you learn to properly maintain equipment such as vehicles and machinery, then the service life of these equipment will be extended, and the productivity and performance of the equipment will increase, which will reduce maintenance. Therefore, the correct use of automatic lubrication pumps is the most critical factor in maintaining the life and productivity of any vehicle and mechanical equipment.
Automatic grease lubrication pumps are oil supply adjustments that rotate all plungers of the pump at the same time through a gear rod and rotating sleeve. When the plunger rotates, the start time of the oil supply remains the same, while the end time of the oil supply changes. The bevel angle of the plunger changes the position of the oil return hole of the plunger sleeve. As the plunger rotation angle is different, the effective stroke of the plunger will also be different, so the oil supply will also change. In the case of no oil supply, the greater the rotation angle of the plunger, the greater the inclination between the upper end face of the plunger and the oil return hole of the open plunger sleeve, and the greater the oil supply. If the rotation angle of the plunger is small, the oil will be cut off earlier, and the oil supply will also become smaller. When the diesel engine is stopped, the oil must be cut off at this time. The longitudinal groove on the plunger can be turned to the oil return hole directly opposite the plunger sleeve. At this time, during the entire stroke of the plunger, the fuel in the plunger sleeve has flowed back to the oil passage through the longitudinal groove and the oil return hole, so the fuel supply is equal to zero. Therefore, when the plunger rotates, the oil supply amount can be adjusted by changing the oil supply end.
Jiaxing Jianhe Machinery provides you with economical and efficient lubrication, the company adheres to a professional, efficient, pragmatic attitude to provide services for every customer throughout the process. If you need a dedicated system for unique equipment, we can design and manufacture dedicated centralized lubrication systems to give you the convenience you need. Our unrivalled expertise and unique production processes ensure that you are always satisfied.
Post time: Nov-12-2022