Is there any difference between manual lubrication systems and electric lubrication systems, and what is the difference between them? First, let’s introduce the definition of a lubrication system. A lubrication system is a series of grease supply, grease discharge and its accessories that provide lubricant to the lubrication part. Sending a certain amount of clean lubricating oil to the surface of the relatively moving parts can achieve liquid friction, reduce the friction resistance and wear of the parts, and clean and cool the surface of the parts. The lubrication system usually consists of an oil channel, an oil pump, an oil filter and some valves. Due to the different working conditions of engine transmission parts, different lubrication methods are used for transmission components with different loads and relative motion speeds. The lubrication system is divided into manual lubrication system and automatic lubrication system.
The centralized lubrication system realizes the timing and quantification of the vehicle during travel. Electric lubrication pumps can save most of the manual operation and improve operational efficiency. Manual lubrication oil injection is not easy to control, electric lubrication pump has the characteristics of timing and quantification, scientific and efficient, can prevent external oil from entering, reduce wear, can effectively extend the service life of the lubrication pump. Manual lubrication is generally oiled once every 10-20 days, and electric lubrication is automatically oiled according to the running time, saving most of the grease costs.
However, due to the simple structure of the manual grease lubrication pump, the main components are plungers, oil reservoirs and pump bodies, etc. are relatively simple processing parts, and the parts are easy to process, so the processing cost is low, and most of the parts are standard parts, the cost is further reduced, so the overall cost performance of the pump is high, and the manual lubrication pump to achieve the same working displacement can be 2-3 times cheaper than the automatic lubrication pump. Manual lubrication systems can be used in a variety of locations without the need for power sources such as power sources or air sources. The main driving power source of the manual grease lubrication pump comes from manual manual triggering, without the need for traditional power sources, so that it will not be limited by the use site like the electric lubrication system, and it can be easily used and operated at any time, and there is no traditional power source, so it can reduce the failure rate and can be used in various places. And the manual grease lubrication pump is small in size, simple and convenient to install, store oil when pulling out the handle, drain oil when pushing the handle, easy to operate, no need for professional knowledge to operate, no need for professional cumbersome training, no need for frequent inspection and maintenance, ordinary workers can complete the refueling operation. Lubrication pumps will inevitably have various failures during use, and they are inevitable, this phenomenon is common in automatic lubrication systems, while manual lubrication systems are rare. Due to the simple structure of the manual lubrication system, it is well interchangeable and easy to find on the market if it needs to be replaced.
Jiaxing Jianhe Machinery provides you with economical and efficient lubrication, the company adheres to a professional, efficient, pragmatic attitude to provide services for every customer throughout the process. If you need a dedicated system for unique equipment, we can design and manufacture a dedicated automatic lubrication system to give you the convenience you need.
Post time: Nov-03-2022