Electric drum pumps are suitable for pumping a variety of low-corrosive, impurity-free, low-viscosity liquids from oil drums or similar containers. With different materials and motors, it can transport diesel, kerosene, engine oil, gasoline, hydraulic oil and chemical liquid media. In order to achieve different functions and values, with the advancement of science and technology and the needs of the market, electric drum pumps can be divided into stainless steel electric drum pumps, plastic electric drum pumps, aluminum alloy electric drum pumps, etc. The electric grease pump is mainly composed of pump head tee, locking handwheel, filter cover, tightening outlet, and lower end cover of the motor. Pump tube and other components. These elements make up the electric grease pump and also provide convenience for our lives.
The reason why the electric oil drum pump can send the liquid out is due to the action of centrifugal force, the oil pump before work, the pump body and the inlet pipe must be filled with solution to form a vacuum state, when the impeller rotates rapidly, the blades promote the water to rotate quickly, the rotating water flies from the impeller under centrifugal action, the pump electric oil drum pump water is thrown out, the central part of the impeller forms a vacuum area, the liquid is pressed into the inlet pipe from the pipe network under atmospheric pressure. Cycle all the way like this, and continuous pumping can be achieved. During the whole operation process, it should be noted that the electric drum pump must be filled with water into the pump casing before starting, otherwise it will cause the pump body to heat, vibration, reduce the water output, and cause damage to the pump and equipment accidents.
Matters that should be paid attention to when using the electric oil drum pump: pay attention to the operation of the power machine, observe the water temperature and oil temperature; Pay attention to the sound and vibration of the unit, when the vibration of the unit is too large or there is noise, it is often the volute type split pump that sends a fault signal, and must be stopped for maintenance to eliminate hidden dangers; whether there are floating objects at the water inlet and whether the depth of the bottom valve is sufficient to submerge; Whether the fastening places are loose, and whether the joints of the inlet pipe are tight and do not leak. When the centrifugal pump stops, the outlet valve should be slowly closed, the speed of the power machine should be gradually reduced, so that it is in a light load state, and finally the power machine should be stopped.
Electric oil drum pump compact structure, stable performance, simple operation, as long as the pump body is inserted into the oil drum, open the power switch can suck out the oil in the barrel, convenient labor-saving, efficiency.
Jiaxing Jianhe Machinery provides you with economical and efficient lubrication. If you need a dedicated system for your unique equipment, we can design and manufacture a dedicated automatic lubrication system to provide you with the convenience you need.
Post time: Nov-28-2022