Multi-line system means that the pump has multiple outlets, and different systems can be connected after each outlet. The lubrication points are relatively dispersed, each lubrication point requires a relatively large amount of lubrication, and the amount of each lubrication point can be adjusted. The entire system can be monitored by visual or electrical signals to the distribution valves. The system is extended with pump elements to provide comprehensive lubrication of small and medium-sized systems and machines.
The chain automatic lubrication system is designed for the characteristics of the chain operating conditions, not limited by the length of the chain, the size of the chain link pin, the form of the chain, etc., with accurate, timing and quantitative automatic refueling to the pin, chain link or roller lubrication points of the chain, realizing the whole process of refueling in the chain operation, which not only meets the automatic lubrication of various forms of conveyor chain, but also can meet different forms of transmission chain lubrication.
The chain lubrication system has a simple structure and reliable performance. It is easy to install and operate. The lubrication cycle is accurate and the quantitative oil supply is accurate. Effectively lubricate the conveyor chain and transmission chain to improve their service life. Reduce fuel consumption and costs.
Compared with the traditional lubrication method, the multi-line chain lubrication method mainly has the following advantages: fine lubrication, under the premise of meeting the demand for lubricant in the chain, minimizing the consumption of lubricant. Less lubricant consumption, can avoid environmental pollution, green environmental protection. Jet lubrication is adopted to solve the problem of poor fluidity of lubricant. The use of low oil level alarm device can send out oil shortage signal in time. Proximity switch and programmable controller control mode realize the full automatic management of chain lubrication.
The principle of the chain lubrication system: After starting the system, the system enters intermittent counting, and when the proximity switch detects that the number of link links reaches a pre-set value, the system starts to spray. The jet beat is beaten by the proximity switch, and the single solenoid valve power-on time is adjustable from 500-5000 milliseconds. When the number of injections reaches the preset value, the system enters intermittent technology mode again. It’s a cycle, and it’s going on and on.
Chain oil-air lubrication systems are widely used, and can be used on all types of conveyor chains on automatic production lines, such as industrial automation production lines, various lifts, cold beds, elevators and drying ovens for can printing, home appliance production conveyor lines and assembly lines, transportation chains of various materials such as glass fiber, etc., whether it is plate transport chains, high temperature lifts, roller chains, lifting chains or non-drive chains.
Jiaxing Jianhe Machinery provides you with economical and efficient lubrication, the company adheres to the professional, efficient, pragmatic attitude to provide services for every customer whole. If you need a dedicated system for unique equipment, we can design and manufacture a dedicated lubrication system to provide you with the convenience you need.
Post time: Nov-29-2022