What is an electric grease pump? Electric lubricating oil pump is composed of pump body, chassis, power forced lubrication bearing sleeve shaft, electric lubricating oil pump safety valve and reflux rubber oil seal and other parts, the main transmission gear is composed of four helical gears when the gear set, the safety valve adopts differential pressure structure, and the motor adopts tin direct structure. Electric grease pump is mainly used in lubrication systems with many distribution points, long pipelines and short oil filling intervals.
The working principle of the electric lubrication pump is that when the meshing gear rotates in the body of the pump, the gear teeth constantly enter and exit and engage with the mesh. In the suction chamber, the gear teeth gradually exit the meshing state, so that the volume of the suction chamber gradually increases, the pressure decreases, and the liquid enters the suction chamber under the action of liquid level pressure and enters the discharge chamber with the gear teeth. In the discharge chamber, the gear teeth gradually enter the meshing state, the teeth between the gears are gradually occupied by the teeth of a gear, the volume of the discharge chamber decreases, the liquid pressure in the discharge chamber increases, so the liquid is discharged from the pump outlet outside the pump, the gear side continues to rotate, the above process is constantly carried out, forming a continuous oil transfer process.
Electric lubrication pumps can be widely used in machine tools, plastics, textiles, light industry, printing, engineering and other mechanical equipment. Electric lubrication pump in the process of operation, its transmission mode is its more important part, in order to ensure that the electric lubrication pump in the operation process is not interfered by the outside world, we had better have a certain understanding of the transmission mode of the electric lubrication pump, so that we can better use the product, the following are some characteristics of the electric lubrication pump transmission mode: 1, pay attention to the transmission mode of the electric lubrication pump can be noted that the speed and pressure range of the entire pumping machine is proportional, and these two parts need to achieve a more coordinated effect in each part. And it can be noted from the aspect of the overall wheel that in the case of geometrically symmetrical wheels, the device is often good, so it is also long and always stable during operation, and the overall fault sound is also very small, in the low noise range. 2. In the use of the actual equipment, it will be detailed that the inside of the electronically controlled lubrication pump cavity does not need any lubricating grease, so the overall effect of using the electric lubrication pump is also very good. And the structure of the pump chamber in the lubrication pump is also very simple, without any design of compression and exhaust valves, etc., and various departments can work well. Problems with the actual hydrogen extraction effect can also be noted, as hydrogen extraction in this sector is usually not ideal. When we use the electric lubrication pump, in order to ensure that its use function is not chaotic, we must pay attention to its rotation mode, so that once there is a problem with the rotation mode, it may be a problem with the product itself, and we need to stop for inspection, replacement and maintenance.
Jiaxing Jianhe Machinery provides you with economical and efficient lubrication, the company adheres to a professional, efficient, pragmatic attitude to provide services for every customer throughout the process. If you need a dedicated system for unique equipment, we can design and manufacture dedicated electric lubrication pumps to give you the convenience you need.
Post time: Nov-08-2022