OEM Factory for Cnc Lubrication Oil Pump - DBS type Automatic Grease lubrication Pumps – Jianhe

Product Feature

The motor drives the reducer, and the reducer drives the eccentric wheel to make the plunger reciprocate linearly in the pump body, and sequentially realize the oil absorption and oil discharge process.

1. There are (1-6) independent pump units on the compact lubricator, can be combined with the progressive distributor to form aprogressivegrease lubrication system to supply grease to lube points ,or lube the points directly,This is an economical way to save the cost and service expenses .

2. The motor is fully sealed and has the advantages of water proof and dust proof.

3. The pressure is up to 25MPa, each outlet has a safety valve to prevent the pump unit from overloading.

4. Each outlet standard flow can choose : 1.8cc /min , 5.5cc/min

(Option: You can assemble aseismatic pressure gauge to monitor the whole lubrication system) Standard flow for each outlet is optional :1.8cc/ min, 5.5cc/ min,

5. Power input for different customer demand : 220VAC/50Hz,380VAC /50Hz, or 24VDC.etc.(Option:can buit-in controller which can setting working time and down time.)

Provide power input according to different customer requirements: 220VAC/ 50Hz, 380VAC/ 50Hz or 24VDC.

6. Low level switch, can achieve low liquid level alarm (You can choose to install )

7. PCL control the cycle time: Running time and interval time (You can choose to install )

8. A variety of volume tank selection, tanks have metal and plastic tankselection.

9. A sealed plastic shell covers the main electrical elements, and provides good protection to meet different rough condition.

Product Parameter