Stern Tube System - PV distributor for divertering lubrication system oil circuit – Jianhe

Performance&Characteristics

Connector Ø4 for main road use

• The coupling body is divided into one-way flow, and its oil outlets are 2-10, a total of eight specifications. It has a wide range of applications. The Ø4 main oil pipeline is relayed through it. The threads at both ends of the oil inlet and outlet are M8×1. When relaying, it is connected by a combination of M8×1 oil pipe joints and 4mm double-cone ferrules. The end interface of the system adopts M8. ×1 plug to close it. The resistance type DPC and DPV series metering parts are directly connected to deliver oil to the lubrication point. If there is an extra interface, it can be closed with an M8×1 plug. DPC and DPV series of metering parts directly connected to the equipment lubrication point. It relays and divides the flow and should be used in combination with Ø4 tubing, M8×1 tubing joint and 4mm double cone ferrule.

Connecting body Ø6 for main road use

• Performance and characteristics: The coupling body is divided into one-way flow, and its oil outlets are 2-10, a total of ten specifications. It has a wide range of applications. The Ø6 main oil pipeline is relayed through it. The oil inlet is M10×1, and the threads at both ends of the oil outlet are M10×1 or M8×1. When relaying, it consists of M10×1 or M8×1 oil pipe joints and 6mm Or 4mm double-cone ferrule combination connection, the end interface of the system adopts M10×1 plug to close it. The resistance type DPC and DPV series metering parts are directly connected to deliver oil to the lubrication point. If there is an extra interface, it can be closed with a M10×1 plug. FHA series of metering parts directly connected with equipment lubrication points. It relays and divides the flow and should be used in combination with Ø6 or Ø4 tubing, M10×1 or M8×1 tubing joints and 6mm or 4mm double cone ferrules.

Product Parameter